WASTEWATER - %TOTAL SOLIDS IN SLUDGE
APPLICATION - Measure the % Total Solids of a Waste Water Sludge
These are Continuous Processes with our system being used for Closed Loop Control and Visual Monitoring.
1. Most of the Waste Water collected at a large municipal plant ends up in a Primary Settling Tank. The customer wants to measure and control the %Total Solids of Sludge as it leaves these Primary Tanks.
2. After the Sludge has been processed, it is either put into Storage or Incinerated.
3. The Customer wants to measure the %Total Solids of the Sludge as it is pumped from a storage pond. This Sludge is spread on some sort of field.
4. The Customer wants to measure the %Total Solids of the Sludge as it is pumped to an Incinerator. This measurement is only possible if the Sludge is in a pipe.
BENEFITS - By controlling the % Total Solids of the Sludge, the Customer will save money. They will save money because the Customer:
REPEATABILITY - +/- 0.3 %
MEASURING RANGE - 0.5% to 30% Total Solids
HK EQUIPMENT - HK1-M IN LINE WITH A SIX INCH TEFLON LINED SPOOL PIECE
success through innovation!